Electrocardiographs actually is not common in our daily life, but as long as we have been to the hospital and some medical places can see it is a kind of medical place inside a kind of indispensable equipment, it is mainly used to detect our ecg, observing the condition of the heart, so what do I do when we are in the routine maintenance?

1, prevent dust

That our equipment in various optoelectronic devices and some of the power switch to the spare parts such as, need often clean, moreover because the NDP blood pressure cuff is binding on the body for a long time, also need to make clear, in a timely manner to remove on the smell, relative to some nausea and vomiting blood of patients with blood pressure cuff, more need to clean up immediately.

2, well protected against dampness

That our equipment is applied to optoelectronic components and electronic components, prone to mildew and destroyed after it moist, so can start checking on time, and the conversion of moistureproof desiccant immediately, it's like we used the home appliances is the same, if long time don't need to need to start on time under the condition of plug-in electric drive moisture, In this way, we can achieve a moisture-proof goal.

3, heat

Like this kind of instrument is relatively high accuracy regulation is a relatively fragile, if the environment temperature is too high or too low, will affect its normal operation, so our this kind of instruments and equipment are general provisions to appropriate his operation and storage environment, relative to the ambient temperature is relatively small, the volatility of the regulations and general conditions are equipped with environment temperature conditioners. The temperature in the room should be kept at 20~25 degrees is the better ambient temperature. In addition, such instruments and equipment should be kept away from heat sources, such as infrared therapy devices and other equipment, and should be prevented from direct sunlight.

4, vibration control

If the vibration of the instrument and equipment occurs, it will not only affect its operation characteristics and detection effect, but also continue to lead to the destruction of some components inside. Therefore, the instrument and equipment must be far away from the workbench or that area with vibration source in the case of installation.

5, corrosion

And in the case of its daily maintenance, also need to pay special attention to the whole process of application and storage, need to prevent contact with acid and alkali and other corrosive gas and liquid environment, so as to avoid erosion of parts.

Above, we speak of is in the maintenance of ecg monitor some matters need to pay special attention to, because this class is used to test the accuracy of medical instruments and equipment relative to still has certain rules, if the equipment failures, so relative to the doctor's diagnosis effect, there will be a error influence is relatively large.Monitor manufacturer, EEG machine, Meilun